Pistol
Machine Work
(Machine Work Prices Do Not Include Refinishing Unless Specified)
Red Dot Optic Cuts
Machine Slide for Reflex optic: RMR, SRO, ACRO, Viper, Venom, Lepuold DPP, Burris Fast Fire, Holosun 507c, Holosun 407c, Holosun 407k, Holosun 507k, Holosun 508T, Holosun 509T, Holosun EPS, Swampfox, ect.
Some optic and slide combos may require a new rear dovetail if you want the ability to co-witness with backup suppressor height iron sights. Add $50 for a new rear dovetail (Glock style; located forward of optic).
- 1911’s Series 70 Govt and Commander Length Only: $165 w/o refinishing (metal will be exposed under optic, will delete rear dovetail)
- 1911’s Series 80 Govt and Commander Length Only: $220 w/o refinishing (includes required series 80 to 70 conversion, will delete rear dovetail)
- Beretta PX4 Storm pistols: $350 (includes the necessary modified glock MOS plate)
- Canik $250 (may require refinishing)
- CZ P10c and other polymer framed guns: $150 w/o refinishing (not required; metal will be exposed under optic)
- Diamondback AM2 / DBAM2: $150 deletes rear sight dovetail (+$50 for new rear dovetail in front of optic)
- Glock: $150 w/o refinishing. (not required, but is recommended; metal will be exposed under optic)
- Glock G43: $150 only compatible with RMSc Shield, Holosun 507k, or Sig Romeo Zero
- HK VP9: $175 w/o refinishing (not required; metal will be exposed under optic)
- HK Hammer Fired: $450 i-DOT Conversion (HK USP, USPC, USP Expert, HK45, P30SK, P30, P30L, P2000SK, P2000)
- S&W MP Series: $150 w/o refinishing (not required; metal will be exposed under optic)
- Springfield Hellcat w/o rear dovetail: $150 for RMSc Shield, Holosun 507k, or Sig Romeo Zero
- Springfield Hellcat w/ new rear dovetail: $225 for RMSc Shield, Holosun 507k, or Sig Romeo Zero (dovetail in front of optic)
- Springfield Hellcat OSP: $100 to machine OSP slide to accept Holosun 507k
- Springfield XD, XDm, XD mod2.0: $250 w/o refinishing (includes the necessary modified glock MOS plate)
- Walther CCP Pistols: $200 w/o refinishing (not required; metal will be exposed under optic)
- Walther PPQ Pistols: $300 w/o refinishing (includes the necessary modified glock MOS plate)
*If you do not see the desired optic and slide combination listed above please contact us. We are more than happy to spec out a new combination, but we will need both the optic and the slide present to do so.
Slide Cuts (non optic)
- Port Slide and Barrel: $175 – $350 (will require refinishing)
- Custom Slide Lightening Cuts: $100 – $350 (will require refinishing)
- 45 Degree Carry Bevel on Slide: $100 (will require refinishing)
- Forward Cocking Serrations: $150 (will require refinishing)
- Thread Barrel For Suppressor: $112.50
- Laser Cocking Serrations: $150
- Laser Ports: $150 – $350 (depending on design)
WA i-DOT HK P30 ACRO 509T RMR 507K
WA i-DOT HK P30 SRO
Wright Armory – CZ P10c RMR Cut, Dark Multicam Cerakote
Wright Armory – Glock G19 RMR Cuts, Slide Ports, Forward Cocking Serrations, Dish Cuts, Laser Stippling
Wright Armory – CZ P10c Laser Cut Ports, Slide Machined for Vortex Venom
Wright Armory – Pistol Reddot Milling – RMR, Vortex, Leupold, Burris
Wright Armory – Glock G17 Forward Cocking Serrations, RMR Cut, Palm Stippling
Wright Armory – Cerakote Crusader Theme Build
Wright Armory – Glock G19 Slide Porting
Wright Armory – Glock G43 Milled For RMSc Shield
Wright Armory – 1911 Bobtail Conversion
Wright Armory – Springfield XD40 Internal Comp and Back Bore Barrel Porting
Wright Armory – MP9 RMR Cuts, Forward Cocking Serrations, Top Cocking Serrations
Wright Armory – Springfield XD40 Internal Comp and Back Bore Barrel Porting
Wright Armory – MP9 Custom Pistol Comp
Wright Armory – Beretta PX4 Match Melt Crown
Wright Armory – Springfield XD Machined for Vortex Venom
Wright Armory – Glock 19 RMR Install
Wright Armory – Glock G19 RMR Cuts, Slide Ports, Forward Cocking Serrations, Dish Cuts, Laser Stippling
Wright Armory – Walther PPQ Reddot Cuts, Laser Cut Ports, Stippling Cerakote, Gold Plating
Wright Armory – Beretta PX4 RMR Cut
Wright Armory – XD Porting and Machine Work, TiN Barrel
Wright Armory – 1911 Machined for Vortex Razor Reddot
Polymer Gun Frame Work
Stippling & Undercuts (Glock, XD, XDs, XDm, MP, MP Shield, Sig, Walther, ect.)
There are 3 different hand stippling patterns: Palm Leaf, Tree Bark, and Velcro.
Stippling can be ordered with an extra level of aggressiveness for those that require a more positive grip on their pistols.
Glock Frame Work
- Finger Groove Removal w/ Required Stippling: $195
- Glock Frame Hand Stipple: $205 (includes front, back, sides)
- Glock Grip Reduction: $305 (includes required stippling)
- Single Trigger Guard Under Cut: $76.88 ($20 w/ a frame package)
- Double Trigger Guard Under Cut: $85 ($40 w/ a frame package)
- Full Grip Frame Reduction w/ Finger Groove Removal: $205
- Grip Chop to Accept Compact Mags: $180
- Accelerator Cuts: $102.50 ($67.50 w/ stippling package)
Glocks
- Sight installation: $41.00
S&W MP Series
- Sight installation: $51.25
- Apex Spring and Sear Kit Install: $153.75 all calibers and frame sizes (labor only)
- Apex Spring and Sear Kit w/ Trigger: $153.75(labor only)
1911’s
- Trigger Job: $153.75
- Carry Tune Package: $153.75 (polish breech face, tune & polish extractor, add performance funnel to extractor cut, polish and de-burr all moving pieces, throat and ramp barrel, polish both feed ramps)
- Carry Tune + Trigger Job: $256.25
- Dovetail Sight Installation: $51.25
- Dovetail Front Sight Conversion: $76.88
- Machine Novak Dovetails (front & rear): $153.75
- Machine Slide For Bomar Rear: $275
- Machine Slide For LPA Rear: $205
- Stake Plunger Tube: $67.50
- Install Ejector: $67.50
- Fit Standard Barrel Bushing: $76.88
- Fit Match Barrel Bushing Only: $102.50
- Fit New Safety (single side): $76.88
- Fit Ambi Safety: $102.50
- Fit Beaver-tail: $125 (will require refinishing)
- Forward Cocking Serrations: $100 (will require refinishing)
- Lower and Flare Ejection Port: $102.50
- Fit match barrel and match bushing (labor only): $200
Wright Armory – MP9 Custom Pistol Comp
Wright Armory – Beretta PX4 Match Melt Crown
Wright Armory – Glock G43 Milled For RMSc Shield
Wright Armory – 1911 Bobtail Conversion
Wright Armory – RMR and Reddot Cuts
Wright Armory – CZ P10c RMR Cut, Dark Multicam Cerakote
Wright Armory – Beretta PX4 RMR Cut
Wright Armory – Glock G17 Forward Cocking Serrations, RMR Cut, Palm Stippling
Wright Armory – Glock G19 Slide Porting
Wright Armory – MP9 RMR Cuts, Forward Cocking Serrations, Top Cocking Serrations
Wright Armory – Wilson Combat 1911 Full Profile Comp Conversion
Wright Armory – Glock Porting and TiN Coating
Wright Armory – Glock Stippling – Palm Leaf Pattern
Wright Armory – Glock Stippling – Velcro Pattern
Wright Armory – Glock Stippling – Tree Bark Pattern
Get In Touch
If you have questions about a potential project or you would like more information about our services, please shoot us an email and we will do our best to get you the info that you need. We look forward to working with you!
info@wrightarmory.com
Mesa Location (Headquarters)
Address: 250 S Mulberry #102 Mesa, AZ 85202
Major Cross Streets: Broadway & Alma School
Phone: 480-550-0965
Email: info@wrightarmory.com
Hours of Operation: Mon-Fri: 10am – 6pm
Tempe Location (Inside C2 Tactical Shooting Range)
Address: 8475 S Emerald Dr #108 Tempe, AZ 85284
Major Cross Streets: I-10 & Warner
Phone: 480-550-0965
Email: info@wrightarmory.com
Hours of Operation: Tue-Sat: 10am – 6pm